ASTM E 2112 Standard Practice for Installation of Exterior
Windows, Doors, and Skylights, published in 2007, is available from ASTM
Revision status: The information below was gathered
while Barry Hardman chaired the E06.51.11 task group and Jackie took
minutes and revised documents -- so the information below is out of date
(last updated September 2009). Go to the ASTM web site for current
information and chairman name.
April 24, 2006 task group meeting
July 12-13, 2006 interim meeting
October 23, 2006 meeting
January 24-25, 2007 interim meeting
April 15-16, 2007
task group meeting
October 29, 2007 task
April 7, 2008 task group
September 29, 2009 task
Guiding Principles layout, Draft 6
on the Guiding Principles
INSTALLATION METHOD DOCUMENTS:
Flowchart sample on Methods A and A1 Window Installation
Document on Combined Installation Method A and A1
Installation as of 4/4/07
DECISION TREE FOR WINDOW REPLACEMENT:
Replacement Decision Tree
DRAFT SAMPLE OF E2112 REVISION:
Draft of shortened version
WALL TYPE / WINDOW TYPE MATRIX TO SELECT INSTALLATION METHOD
Wall Type-Window Type Matrix
CHANGE E06.51.11 FROM TASK GROUP TO SUBCOMMITTEE?
Rationale for converting
E06.51.11 to an E06 Subcommittee
following document draft incorporates all the comments, both from
negative and positive votes, that were found persuasive on the the last
ASTM Ballot of WK11252, which is the ASTM version of FMA/AAMA 100.
WK11252 is on hold until FMA and AAMA finish their balloting:
FMA/AAMA 100-07 Draft as of
January 28, 2008: Removed 3/31/2010 (threat by AAMA
of copyright infringement)
OTHER TASK GROUP ACTIVITIES/WORK
We have submitted four new work items, including two new standards
(Click on the hyperlinks to preview):
Standard Practice for the Installation of Windows with Integral Mounting
Fin in Wood Frame Construction for Heavy Weather and Extreme Wind
Locations - This item is based on the Fenestration Manufacturers
Association standard, FMA 100, which was created in response to a
request from the Florida Building Code Commission after the recent
hurricanes. This item is on hold until FMA/AAMA finish their
revisions and balloting.
WK11254 - Standard Practice for the Installation of Windows with
Flanges for Masonry Construction. This item is based on the
Fenestration Manufacturers Association standard, FMA 200, which was
created in response to a request from the Florida Building Code
Commission after the recent hurricanes. This item is on hold
until FMA/AAMA finish their revisions and balloting.
Flashing Width Proposal - revision to E 2112-07 - reballoting a
correction to this version.
Design Professional - Addition to scope of E 2112-07.